Focus Security Alarm Master controller FC-7664 is 16 hard wired zones and 4 partitions security service alarm systems.
It is LCD keypad programming and Telephone remote programming alarm systems.
Hereby we listed some Frequently Asked Questions for FC-7664.
Question 1 :The difference between the master and other 8 users?
Answer: The master can operate the panel with some basic setting. Can manage other users.(such as modify password and rights.
Question 2: on what condition can set free arm/disarm telephone numbers?
Answer: Only under use of FOCUS CMS.
Question 3: what is user code?
Answer: User code is unique number which CMS can identify the panels. Such as ID card, CMS will recall the corresponding information
(name, telephone number etc.) as soon as it receive a user code.
Question 4: what is the role of the remote programming phone? How to use?
Answer: When the user need to program, call to the panel, input Installer code and then hang up, then the panel call the fixed telephone
which one is the remote programming phone, the details please see “phone programming table”
Question 5: Would like to know related problems for voice phone setting?
Answer: The voice phone is that when alarm is triggered, the panel will call the Tel Number, the difference with CMS telephone is that the
former transmit voice message and user send operating information to the panel(such as arm etc.), the latter transmit data to CMS.
Question 6: What is delay setting?
Answer: Entry delay: the panel will alarm immediately when the zones are triggered, but in this mode, the panel will not alarm, then the user
can disarm the system in this period.
Exit delay: when armed, there is some time to prepare to leave, after this period, the panel entry arm mode, in this period the panel will not alarm when it is triggered.
Question 7: Why do you want to set the number of rings?
Answer: The panel will hang up as soon as it receive the number of rings. (in order to user can use the telephone normally)
Question 8: What is the role of force arm?
Answer: The user can force arm the system when a zone is trouble.
Question 9: Why need to register remote control ,detectors?
Answer: The user can operate the panel only after registering remote control (detectors)
Question 10: Where is expansion zone?
Answer: Including 1 .expanding keypad, mean that add the quantity of keypads as your requirement.2.expanding zone, refer to module user manual.
Question 11 :what is AREA? What is that for ?
Answer: It is divided into 4 AREAs, which can be operated individually (such as arm/disarm), 7664 has 4 AREAs, equal to 4 panels.
For example: AREA1,2, AREA 3,4, if zone 1,2 was triggered, zone1,2 will alarm, but others zone will not alarm.
Question 12: what is listen-in loop AREA?
Answer: if loop 4 assigned to AREA 2. Then only zone belongs to AREA 2 was triggered, listen-in loop 4 is enabled